New Renault Master positive trailer body 4x2 Diesel Euro 6
Urgent- 17.22 M³
- seating capacity of 3
- Warrany 24 months
- Gdańsk
|
Main information
|
|
|---|---|
|
Material warranty
|
|
| Website ref. : | 10699635 |
| Bodywork | Refrigerated van |
| Under bodywork | Positive trailer body |
| Make | Renault |
| Range (make : Renault) | Master |
| Condition | New |
| Date of first registration | 07/16/2026 |
| Material warranty | Yes |
| Warranty period | 24 months |
| Country | POLAND |
| Manufacturer | Renault |
Equipment's condition |
|
|---|---|
| Energy | Diesel |
ATP certification |
|---|
|
Suspension / Axles |
|
|---|---|
| Axles | 4x2 |
Measurements |
|
|---|---|
| Volume | 17.22 m³ |
| Surface | 8.61 m2 |
Tonnage |
|
|---|---|
| Maximum allowable weight | 3.5 Tonnes |
Equipment Renault van |
|
|---|---|
|
Additional information |
|
|---|---|
| Refrigerating unit type | Electric |
| Country (range) | POLAND |
| CO2 emissions | 347 g/km |
| Number of seats | 3 |
Characteristics Renault Master |
|
|---|---|
| Drive | Left-hand drive |
| Euro norm | Renault Euro 6 |
| Mileage | 16 km |
Box size |
|
|---|---|
| Height of truck bed | 2.0 metres |
| Internal width of truck bed | 2.05 metres |
| Internal length of truck bed | 4.2 metres |
Gear box and transmission |
|
|---|---|
| Gearbox | Gear shift |
Motor |
|
|---|---|
| Power | 170 HP |
| Engine power | 125 kW |
| Engine size | 1997 cc |
Cabin equipment |
|---|
|
Notes |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
See all
|
Notes |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
Main information
|
|
|---|---|
|
Material warranty
|
|
| Website ref. : | 10699635 |
| Bodywork | Refrigerated van |
| Under bodywork | Positive trailer body |
| Make | Renault |
| Range (make : Renault) | Master |
| Condition | New |
| Date of first registration | 07/16/2026 |
| Material warranty | Yes |
| Warranty period | 24 months |
| Country | POLAND |
| Manufacturer | Renault |
Equipment's condition |
|
|---|---|
| Energy | Diesel |
ATP certification |
|---|
|
Suspension / Axles |
|
|---|---|
| Axles | 4x2 |
Measurements |
|
|---|---|
| Volume | 17.22 m³ |
| Surface | 8.61 m2 |
Tonnage |
|
|---|---|
| Maximum allowable weight | 3.5 Tonnes |
Equipment Renault van |
|
|---|---|
|
Additional information |
|
|---|---|
| Refrigerating unit type | Electric |
| Country (range) | POLAND |
| CO2 emissions | 347 g/km |
| Number of seats | 3 |
Characteristics Renault Master |
|
|---|---|
| Drive | Left-hand drive |
| Euro norm | Renault Euro 6 |
| Mileage | 16 km |
Box size |
|
|---|---|
| Height of truck bed | 2.0 metres |
| Internal width of truck bed | 2.05 metres |
| Internal length of truck bed | 4.2 metres |
Gear box and transmission |
|
|---|---|
| Gearbox | Gear shift |
Motor |
|
|---|---|
| Power | 170 HP |
| Engine power | 125 kW |
| Engine size | 1997 cc |
Cabin equipment |
|---|
|
Notes |
|---|
|
Airbag package (FAB02 SABG0 ABCXL)
driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
|
See all
|
Notes |
|---|
|
Airbag package (FAB02 SABG0 ABCXL) driver and passenger airbag driver side airbag passenger airbag switch 16" steel with full hubcaps heated front seats fog lights reinforced battery high beam assistant LED cabin lighting - Intermediate frame with bottom binding made of high-strength aluminum profiles, - Body made of sandwich panels, insulated with polyurethane foam, 80 mm walls and 100 mm ceiling - Exterior and interior cladding made of white polyester laminate - Double-leaf rear doors with an opening angle of 270, insulated with foam, equipped with fittings (external tubular lock for each door, 3 hinges for each door) made of acid-resistant steel (grade 1.4301) locked with a key (customs locks with the possibility of installing a seal) - Rear door frame made of acid-resistant steel with a handle - Rear doors and walls protected against damage by a mechanical aluminum fender strip - body frame made of anodized aluminum profiles - number of lighting points in the body depending on the internal length bodywork, switch in the driver's cabin -All materials used have PZH certificates and may be approved for contact with food -Plastic wheel arches with mud flaps mounted above the rear axle wheels -marker lights mounted in accordance with applicable Road Traffic Law regulations -Entrance ladder extending at the rear doors -Insulated floor, 15 mm waterproof plywood, anti-slip screed (lamb) -Rubber bumpers on the rear door frame -Foldable side underrun protection strips (set) Additional equipment: -Roof spoiler + side fairings (white) -Stretch rod mounting strip -Temperature recorder with DR 201 printer -Installation of factory reversing sensors GSR2 -Zanotti Z380 single refrigeration unit power supply -Airbag set with compressor (1 perimeter) -Painted steel frame extension |
Mercedes refrigerated van Sprinter 411cdi FIRANKA SPROWADZONY Z FRANCJI / PRIVAT
Ford refrigerated van TRANSIT
Opel mono temperature
Renault negative trailer body Master