New Iveco Daily tipper van 70C18 4x2 Diesel Euro 6 crane
Urgent- 5 M³
- 7 Tonnes
- Gdańsk
|
Main information
|
|
|---|---|
| Website ref. : | 10664437 |
| Bodywork | Tipper van |
| Make | Iveco |
| Range (make : Iveco) | Daily |
| Model | 70C18 |
| Condition | New |
| Date of first registration | 07/16/2026 |
| Country | POLAND |
| Manufacturer | Iveco |
Equipment's condition |
|
|---|---|
| Energy | Diesel |
| Country (range) | POLAND |
Auxiliary Crane |
|
|---|---|
| |
| Lifting capacity at end of boom | 1.12 Tonnes |
| Load capacity | 2700 Kg |
| Working radius | 3.6 metres |
Suspension / Axles |
|
|---|---|
| Axles | 4x2 |
Motor |
|
|---|---|
| Power | 176 HP |
| Engine size | 2998 cc |
Measurements |
|
|---|---|
| Surface | 8.15 m2 |
| Volume | 5 m³ |
Equipment Iveco van |
|
|---|---|
|
Additional information Iveco 70C18 |
|---|
|
Characteristics Iveco Daily - Crane |
|
|---|---|
| Drive | Left-hand drive |
| Euro norm | Iveco Euro 6 |
| Mileage | 16 km |
| Fuel tank capacity | 115 L |
Box size |
|
|---|---|
| Internal height of truck bed | 0.6 metres |
| Internal width of truck bed | 2.25 metres |
| Internal length of truck bed | 3.62 metres |
Gear box and transmission |
|
|---|---|
| Gearbox | Gear shift |
Tonnage |
|
|---|---|
| Total loaded weight | 7 Tonnes |
Cabin equipment |
|---|
|
Notes |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
See all
|
Notes |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
Main information
|
|
|---|---|
| Website ref. : | 10664437 |
| Bodywork | Tipper van |
| Make | Iveco |
| Range (make : Iveco) | Daily |
| Model | 70C18 |
| Condition | New |
| Date of first registration | 07/16/2026 |
| Country | POLAND |
| Manufacturer | Iveco |
Equipment's condition |
|
|---|---|
| Energy | Diesel |
| Country (range) | POLAND |
Auxiliary Crane |
|
|---|---|
| |
| Lifting capacity at end of boom | 1.12 Tonnes |
| Load capacity | 2700 Kg |
| Working radius | 3.6 metres |
Suspension / Axles |
|
|---|---|
| Axles | 4x2 |
Motor |
|
|---|---|
| Power | 176 HP |
| Engine size | 2998 cc |
Measurements |
|
|---|---|
| Surface | 8.15 m2 |
| Volume | 5 m³ |
Equipment Iveco van |
|
|---|---|
|
Additional information Iveco 70C18 |
|---|
|
Characteristics Iveco Daily - Crane |
|
|---|---|
| Drive | Left-hand drive |
| Euro norm | Iveco Euro 6 |
| Mileage | 16 km |
| Fuel tank capacity | 115 L |
Box size |
|
|---|---|
| Internal height of truck bed | 0.6 metres |
| Internal width of truck bed | 2.25 metres |
| Internal length of truck bed | 3.62 metres |
Gear box and transmission |
|
|---|---|
| Gearbox | Gear shift |
Tonnage |
|
|---|---|
| Total loaded weight | 7 Tonnes |
Cabin equipment |
|---|
|
Notes |
|---|
|
dump truck + crane,
brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
|
See all
|
Notes |
|---|
|
dump truck + crane, brand new, 2024y, on stock Chassis equipment: - 3 seats -manual air conditioning, -suspension driver's seat with armrest, -DAB radio, MP3, Bluetooth -cruise control, -multifunction steering wheel, -AEBS emergency braking system, -115-litre fuel tank, -reinforced rear suspension -steel radiator and oil pan cover, -electronic differential lock system and hill descent assistant, -factory power take-off (PTO) Romcar self-unloading body: Internal dimensions: 3620 x 2250 x 600 (mm) -three-way tipper -600mm steel sides -rear side opening in 2 axes of rotation, -slow lowering valve, -rolled tarpaulin -mesh covers for rear lights -side underrun protection strips, -toolbox, -transport handles in the floor, 4 pieces per side, -intermediate frame prepared for mounting a FASSI crane FASSI M40A.1.12 Crane Lifting capacity: 2.7t at 1.5m arm length 1.6t at 2.55m arm length 1.12t at 3.6m arm length - version with LMLD (full lifting capacity diagrams, crane locking system in case of overload, locks on all cylinders (lifting, extension and on supports), emergency STOP buttons, panel informing about correct crane folding from transport position) - crane controlled from one point (right side) - TWO hydraulically extendable arms - support legs extend manually, lowered hydraulically, - cast column base, - oil tank - sensors on supports informing about their correct folding for transport, - levels on support beams - RAL red color 3020 - operating instructions - maintenance and repair instructions - CE version - crane lifting capacity limiter with STOP button and information about crane load 90% and 100% - FSC/L system allowing the crane to work in the event of maximum extension of both beams and support cylinders on the ground, - pump for powering the crane, tipping + flow divider |
Opel standard Movano CDTI 145
Mercedes tipper van SPRINTER
Iveco three-way side Daily 35C14
Mercedes tipper van 25ASTER